这是关于某一机器的编程部分说明书，由于有些内容重复，所以省了一些！请各位大侠多多帮忙！
From the Dispensing Elements Toolbar(Multiple)
To place a pattern from the Dispensing Elements Toolbar:
1.In the programming Window,select 某图标(非英文):piace pattern.The Edit window opens.
2. ...Avaiable patterns list.
3.Specify the pattern origin in one of the following ways:
(1)Under Location,click on the top radio button and select a named location from the drop-down list.click on teach.
(2)Under Location,click on the bottom radio and use the Dispenser control arrows to move to the desired location.Click on teach.If you wish to verify that the correct location has been selected,click on the GO TO button.
4.If desired,rotate the pattern at its （origin crefer to pattern rotation below).
5....piace the same pattern or different patterns on the workpiece.
6....
Fromthe Program Menu(single)
To place a pattern from the program Menu:
1....
2....
3.Specify the pattern origin in one of the following ways.
(1)Under Location,click on the top radio button and select a named location from the drop-down list.click on teach.
(2)Under Location,click on the bottom radio and use the Dispenser control arrows to move to the desired location.Click on teach.
NOTES:The location mode will be disabled if no pattern locations have been taught for the currect pattern.If you wish to verify that the correct location has been selected,click on the GO TO button.
|
