已经分别尝试用“安全模式”，“最后一次正确登陆”和“正常进入Windows”这三种启动模式想登陆到桌面，但是都失败了（每次打开电脑，检测完内存后就自动重启）。也尝试在BIOS中使 用“出厂最安全设置”和“出厂最优化设置”，还是一样的结果。开机的时候，检测声是正常的，也可以排除电源的原因。 想用系统安装光盘来修复或者重装系统，安装程序在进行例行检查和必要的组件加载当中， 就弹出以下的STOP信息。 *** STOP: 0X000000D1 (OX00000011,OX00000002,OX00000000,OX00000011) DRIVER_IRQT_NOT_OR_EQUAL If this is the first time you\\\'ve seen this stop error screen,restart your computer.If this screen appears again,follow these stepa: Check to make sure any new hardware or software is properly installed.IF this is a new installation,ask your hardware or software manufacturer for any Windows 2000 updates you might need. If problems continue,disable or remove any newly installed hardware or software.Disable BIOS memory potions such as caching or shadowing .Check your hard drive tomake sure it is properly configured and terminated.If you need to use safe mode to remove or disable comonents,restart your computer,press F8 to elect Advanced Startup Oplions,and then select safe mode. Refer to your Getting Started manual far more information on troubleshooting stop errors我该如何解决这一问题？
我的建议是重新分区
提问者对答案的评价：
那就只有先用起动盘格式C.再重装了.
格式化掉重新安装系统不要理会这些信息，都是没有用处的他说的是硬件软件导致的冲突，不过你也可以检查一下到底是不是我的就是由于cpu温度过高导致的经常重启，显示的也是这些东西 祝你好运 ^_^ |
