综合几位上面的意见： virtualbox占用空间少，功能上可能比vmware稍微少点。2应该是驱动问题。3肯定没影响，1的话，我没用过，你可以通过局域网来连接，还能练练这方面的手 一、这个我就没有整过了,我是开samba的以下方法你参考一下Sharing folders between the host and the guestIn the settings of the virtual machine go to shared folders tab and add the folders you want to share.(NOTE: You need guest additions installed in order to use this feature. When you have booted the virtual machine go to devices tab and select "Install guest additions". This feature in only available in the PUEL version)Then to use the shared folder in the windows guest machine:In a Windows guest, use the following command:net use x: \\vboxsvr\sharename While vboxsvr is a fixed name, replace "x:" with the drive letter that you want to use for the share, and sharename with the share name specified with VBoxManage.In a Linux guest, use the following command:mount -t vboxsf [-o OPTIONS] sharename mountpoint Replace sharename with the share name specified with VBoxManage, and mountpoint with the path where you want the share to be mounted (e.g. /mnt/share). The usual mount rules apply, that is, create this directory first if it does not exist yet. Beyond the standard options supplied by the mount command, the following are available: iocharset CHARSET to set the character set used for I/O operations (utf8 by default) and convertcp CHARSET to specify the character set used for the shared folder name (utf8 by default).二、这个的话需要自己设置的.Getting USB to work in the guest machine(Only available in the PUEL edition)First in order to make usb available for use to the virtual machine you must add this line to your /etc/fstabnone /proc/bus/usb usbfs devgid=85,devmode=664 0 085 is is the id of the group which should be allowed to access USB-devices. Change it to the id of your vboxusers group. You can get the id by runningcat /etc/group | grep vboxusersIf you don't mind a security hole change devmode from 664 to 666.Then you need to reboot in order for the changes to take effect. After that click the USB tab in the settings of the virtual machine and select which devices are available to your pc on boot. If you wish your virtual machine to use device that you have just plugged in (assuming the virtual machine has booted already), go to the VirtualMachine screen go to devices -> USB Devises -> and select the device you wish to plug in the virtual pc.
|
